Unless otherwise noted in the products listed below, all Audix products purchased in the USA feature a one-year limited warranty.
All Audix products are warranted to the original purchaser to be free of defects in materials and workmanship from date of purchase as follows:
3 years for Fusion Series and Condenser microphones
If a product fails within the warranty period due to materials or workmanship, Audix will repair or replace said product at Audix discretion, at no charge with proof of purchase from an authorized Audix dealer. Audix does not pay or reimburse shipping costs for warranty repairs or returns. The warranty excludes any causes other than manufacturing defects, such as normal wear, abuse, environmental damage, shipping damage, or failure to use or maintain the product per the supplied instructions.
No Implied Warranties: All implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose are hereby excluded. The liability of Audix, if any, for damages relating to allegedly defective products shall be limited to the actual price paid by Dealer for such products and shall in no event include incidental or consequential damages of any kind.
OTHER THAN THIS WARRANTY, AUDIX MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, THE USE OF THE PRODUCTS, THE PERFORMANCE OF THE PRODUCTS.
AUDIX SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES ARISING FROM OR BASED ON THESALE, USE, STORAGE OR DISPOSAL OF THE PRODUCTS, AUDIXÕS SERVICE WORK, BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, OR ANY OTHER THEORY OF LIABILITY, EVEN IF AUDIX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
GOVERNING LAW: This agreement will be governed by and construed in accordance with the laws of the state of Oregon. Venue for any action or proceeding shall exclusively be in Multnomah County, Oregon, U.S.A.
For RA approval please email:
service@audixusa.com or call 503-682-6933. Outside the USA, please contact the local dealer or distributor.
AX MICROPOD12HC
Modular Gooseneck Microphone System
$529.00
- Natural accurate sound
- Modular Threaded capsule
- Low noise electronics, dual circuitry, internally balanced
- RF Immunity
- Ideal for: Pulpit, Podium, Board meetings, Courtroom
The MicroPod TM Series is a modular system consisting of the AX M1250B miniature condenser microphone combined with either a 6, 12, or 18-inch gooseneck. Designed for applications such as presentations, meetings, and teleconferencing, the MicroPod Series is known for clarity, immunity to RF, excellent sound quality, and ease of operation. The MicroPods have the ability to accurately capture and reproduce speech from a comfortable distance.
The MicroPod Gooseneck Series is characterized by a uniformly controlled cardioid polar pattern, helping to isolate the speaker from other ambient noise in the room or on the stage. The MicroPod is also available with a hypercardioid polar pattern for tighter pick-up; a shotgun pattern is also available for greater reach and more focused response. With a wide frequency range of 50 Hz – 19 kHz, the MicroPods will provide natural sound with an exceptional transient response.
One of the advantages of the MicroPod is that the gooseneck can be utilized with any of the microphones from the Micros TM Series, allowing for more flexibility and a broad range of applications. The MicroPod Series, which is often used in conjunction with the Audix ATS Series table stand with a lit on-off switch, may also be used on a standard mic stand when used with the DCLIP microphone stand adapter. The MicroPod Series features a machined brass microphone with an integrated mic preamp, field-replaceable capsule, high-quality gooseneck terminating in a standard XLRm, and a variety of optional accessories. The MicroPod Series require 18 – 52 Volts phantom power and are available in a non-reflective black matte finish.
Designed, machined, assembled, and tested by Audix in the USA.
Note: ATS10 table stands sold separately.
Find Online
The MicroPod Gooseneck Series is characterized by a uniformly controlled cardioid polar pattern, helping to isolate the speaker from other ambient noise in the room or on the stage. The MicroPod is also available with a hypercardioid polar pattern for tighter pick-up; a shotgun pattern is also available for greater reach and more focused response. With a wide frequency range of 50 Hz – 19 kHz, the MicroPods will provide natural sound with an exceptional transient response.
One of the advantages of the MicroPod is that the gooseneck can be utilized with any of the microphones from the Micros TM Series, allowing for more flexibility and a broad range of applications. The MicroPod Series, which is often used in conjunction with the Audix ATS Series table stand with a lit on-off switch, may also be used on a standard mic stand when used with the DCLIP microphone stand adapter. The MicroPod Series features a machined brass microphone with an integrated mic preamp, field-replaceable capsule, high-quality gooseneck terminating in a standard XLRm, and a variety of optional accessories. The MicroPod Series require 18 – 52 Volts phantom power and are available in a non-reflective black matte finish.
Designed, machined, assembled, and tested by Audix in the USA.
Note: ATS10 table stands sold separately.
Specifications
