Unless otherwise noted in the products listed below, all Audix products purchased in the USA feature a one-year limited warranty.
All Audix products are warranted to the original purchaser to be free of defects in materials and workmanship from date of purchase as follows:
3 years for Fusion Series and Condenser microphones
If a product fails within the warranty period due to materials or workmanship, Audix will repair or replace said product at Audix discretion, at no charge with proof of purchase from an authorized Audix dealer. Audix does not pay or reimburse shipping costs for warranty repairs or returns. The warranty excludes any causes other than manufacturing defects, such as normal wear, abuse, environmental damage, shipping damage, or failure to use or maintain the product per the supplied instructions.
No Implied Warranties: All implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose are hereby excluded. The liability of Audix, if any, for damages relating to allegedly defective products shall be limited to the actual price paid by Dealer for such products and shall in no event include incidental or consequential damages of any kind.
OTHER THAN THIS WARRANTY, AUDIX MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, THE USE OF THE PRODUCTS, THE PERFORMANCE OF THE PRODUCTS.
AUDIX SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES ARISING FROM OR BASED ON THESALE, USE, STORAGE OR DISPOSAL OF THE PRODUCTS, AUDIXÕS SERVICE WORK, BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, OR ANY OTHER THEORY OF LIABILITY, EVEN IF AUDIX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
GOVERNING LAW: This agreement will be governed by and construed in accordance with the laws of the state of Oregon. Venue for any action or proceeding shall exclusively be in Multnomah County, Oregon, U.S.A.
For RA approval please email:
service@audixusa.com or call 503-682-6933. Outside the USA, please contact the local dealer or distributor.
AX M1280BS
Miniaturized Condenser Microphone
$589.00
- Ideal for: Acoustic instruments, Room miking, Speech
- Lightweight, low-profile with miniaturized preamp circuitry
- No external power adapter needed
- 15 mm gold vapor diaphragm
- Immune to RF interference
The M1280B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1280B condenser microphone is equipped with a cardioid capsule and is also available with hypercardioid, omnidirectional, or shotgun capsules. The M1280B has a very wide frequency response and may be used in a wide variety of stage, studio, and broadcast applications.
The M1280B miniaturized condenser microphone is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.
Designed, machined, assembled, and tested by Audix in the USA.
Model variations:
M1280B – Wide frequency response micro condenser microphone with integrated preamp and RFI immunity. Includes 25′ cable, clip, and windscreen. Requires 18 – 48 V phantom power. Black.
M1280BHC – As above with hypercardioid capsule for tighter pickup and greater isolation.
M1280BO – As above with an omnidirectional capsule for recording and room miking.
M1280BS – As above with shotgun capsule for distance miking and less ambiance.
Find Online
The M1280B miniaturized condenser microphone is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.
Designed, machined, assembled, and tested by Audix in the USA.
Model variations:
M1280B – Wide frequency response micro condenser microphone with integrated preamp and RFI immunity. Includes 25′ cable, clip, and windscreen. Requires 18 – 48 V phantom power. Black.
M1280BHC – As above with hypercardioid capsule for tighter pickup and greater isolation.
M1280BO – As above with an omnidirectional capsule for recording and room miking.
M1280BS – As above with shotgun capsule for distance miking and less ambiance.
Specifications
-
Polar Pattern Cardioid, Hypercardiod, Omni, SupercardiodSensitivity 12 mV (C/HC), 12 mV (O), 18 mV (S) / Pa @ 1kMaximum SPL ≥147 dB dBLength 27.17 inTransducer Type Condenser dynamic / electret
-
Frequency Response 42 Hz - 20 kHzOutput Impedence 152 ΩConnector 3-pin XLRmMaxDiameter 0.55 in
-
