Unless otherwise noted in the products listed below, all Audix products purchased in the USA feature a one-year limited warranty.
All Audix products are warranted to the original purchaser to be free of defects in materials and workmanship from date of purchase as follows:
3 years for Fusion Series and Condenser microphones
If a product fails within the warranty period due to materials or workmanship, Audix will repair or replace said product at Audix discretion, at no charge with proof of purchase from an authorized Audix dealer. Audix does not pay or reimburse shipping costs for warranty repairs or returns. The warranty excludes any causes other than manufacturing defects, such as normal wear, abuse, environmental damage, shipping damage, or failure to use or maintain the product per the supplied instructions.
No Implied Warranties: All implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose are hereby excluded. The liability of Audix, if any, for damages relating to allegedly defective products shall be limited to the actual price paid by Dealer for such products and shall in no event include incidental or consequential damages of any kind.
OTHER THAN THIS WARRANTY, AUDIX MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, THE USE OF THE PRODUCTS, THE PERFORMANCE OF THE PRODUCTS.
AUDIX SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES ARISING FROM OR BASED ON THESALE, USE, STORAGE OR DISPOSAL OF THE PRODUCTS, AUDIXÕS SERVICE WORK, BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, OR ANY OTHER THEORY OF LIABILITY, EVEN IF AUDIX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
GOVERNING LAW: This agreement will be governed by and construed in accordance with the laws of the state of Oregon. Venue for any action or proceeding shall exclusively be in Multnomah County, Oregon, U.S.A.
For RA approval please email:
service@audixusa.com or call 503-682-6933. Outside the USA, please contact the local dealer or distributor.
AX M3WDK
Mic/Interface Kit for the Dante | AES67 Microphone System
$2,003.00
- 100% RF shielding and immunity
- Evenly dispersed sound with undetectable phase
- TAA compliant
- Very high output, low self-noise
- Easy to install
The M3DK is a convenient kit that pairs the Audix M3 hanging ceiling microphone with the Audix DN43 Dante | AES67 microphone interface, providing a simple to install, network-ready way to stream Audix audio performance through Ethernet networks.
The M3 is an innovative, tri-element hanging microphone designed for applications where aesthetics, sound quality, and ease of installation are critical. The frequency response and polar pattern of its three phase-coherent hypercardioid capsules are tailored for voice clarity and rejection of extraneous noise.
The Audix DN43 interface features one microphone port engineered exclusively for the Audix M3 tri-element microphone and one port for Audix RJ45-equipped single-element microphones. Each channel has selectable, independently controlled pre-amp gain, as well as low- and high-pass filters. It features balanced audio inputs with RFI filtering and delivers high-fidelity 24-bit, 48KHz audio.
M3 FEATURES
100% RF shielding and immunity
Very high output, low self-noise
Frequency and pattern tailored for voice clarity and rejection of extraneous noise
Evenly dispersed sound with undetectable phase
High-quality silicone jacketed microphone cable with adjustable length and position
Plenum-rated junction box with RJ45 connector
TAA compliant
Easy to install
Available in white and grey (see below for model options)
DN43 FEATURES
Balanced audio inputs with RFI filtering
High-fidelity 24-bit, 48KHz audio
Each channel has selectable pre-amp gain, as well as low- and high-pass filters
Two 5V logic outputs per port, with source/sink capability, for LEDs, if the mic is so equipped
One logic input per single-element microphone port for buttons
48V phantom power output
Operates on PoE from any IEEE 802.3af compliant equipment
Dante Domain Manager (DDM) ready
Find Online
The M3 is an innovative, tri-element hanging microphone designed for applications where aesthetics, sound quality, and ease of installation are critical. The frequency response and polar pattern of its three phase-coherent hypercardioid capsules are tailored for voice clarity and rejection of extraneous noise.
The Audix DN43 interface features one microphone port engineered exclusively for the Audix M3 tri-element microphone and one port for Audix RJ45-equipped single-element microphones. Each channel has selectable, independently controlled pre-amp gain, as well as low- and high-pass filters. It features balanced audio inputs with RFI filtering and delivers high-fidelity 24-bit, 48KHz audio.
M3 FEATURES
100% RF shielding and immunity
Very high output, low self-noise
Frequency and pattern tailored for voice clarity and rejection of extraneous noise
Evenly dispersed sound with undetectable phase
High-quality silicone jacketed microphone cable with adjustable length and position
Plenum-rated junction box with RJ45 connector
TAA compliant
Easy to install
Available in white and grey (see below for model options)
DN43 FEATURES
Balanced audio inputs with RFI filtering
High-fidelity 24-bit, 48KHz audio
Each channel has selectable pre-amp gain, as well as low- and high-pass filters
Two 5V logic outputs per port, with source/sink capability, for LEDs, if the mic is so equipped
One logic input per single-element microphone port for buttons
48V phantom power output
Operates on PoE from any IEEE 802.3af compliant equipment
Dante Domain Manager (DDM) ready
Tri-Element Hanging Ceiling Microphone
for Superior Voice Clarity and Easy Installation
Specifications
-
Polar Pattern HpercardioidSensitivity 34 mV / Pa @ 1kMaximum SPL ≥128 dB dBLength 19.59 inTransducer Type Electret dynamic / electret
-
Frequency Response 30 Hz – 19 kHzOutput Impedence 150 ΩConnector Terminal block or XLRMaxDiameter 1.97 in
-
Coverage Examples
Coverage patterns may vary depending on room acoustics and signal chain, but these diagrams provide a conservative estimate of expected pick-up in reasonable to poor acoustic spaces.
Conference Room
Room Dimension: 10’ x 20’
Ceiling Height: 8’–10’
