Tabletop Installed Microphone

The only tabletop microphone that swivots.

The M65 is an excellent alternative to a standard gooseneck microphone for education, conference rooms, and government applications. The M65’s socket swivel mount is so innovative, we had to invent a word to describe it. Swivoting technology gives the M65 a fluid, quiet, and consistent 240° rotation and a 40° pivot, while retaining the crisp lines of individually-machined, brass solid-tube construction. Swivoting also ensures a uniform mic position for a more consistent gain structure when multiple M65s are in use and lets the M65 lie flat for an unobstructed view when not in use.

The M65’s superb sound quality starts with the award-winning audibility of the MicrosTM circuitry. All electronics are fully integrated preamp circuitry with high sensitivity and low noise. Signal output is balanced to eliminate RF interference caused by cell phones and mobile devices.

Installing the M65 only requires drilling one 1 1/4″ hole and three 1/8″ holes into a surface, with no additional tools needed. The M65’s mounting hardware easily secures the microphone in place.

All M65 microphones are finished in an exquisite black nickel plating and come with an 8-foot cable terminating in terminal block connectors. Both male and female terminal block connectors are provided. Built to withstand daily use, the M65 also comes with a threaded field replaceable foam windscreen to reduce plosives.

Especially suited to applications where aesthetics, ease of installation, and sound quality are crucial, the M65 is an excellent alternative to a standard gooseneck microphone for government, courtroom, boardroom, video teleconferencing (VTC), distance learning, house of worship, and hospitality applications.


  • Optimized for speech
  • Unique pivoting swivel mount technology
  • Immunity from RF interference
  • Low noise circuitry
  • Designed, machined, assembled, and tested in the USA
Where To Buy M65 – Tabletop Installed Microphone
Transducer Type Condenser
Frequency Response 60 Hz – 10 kHz
Polar Pattern Hypercardioid
Output Impedance 150 ohms
Sensitivity 32 mV
Equivalent Noise Level 22 dB (A-weighted)
Signal to Noise Ratio 72 dB
Maximum SPL ≥130 dB
Dynamic Range 108 dB
Power Requirements 18 – 52 V phantom
Connector Terminal block connector
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish Brass / black nickel finish
Weight 70 g / 2.4 oz (Mic & Cable)
Length 456 mm / 14 in
Download Spec Sheet

1x Brass solid-tube microphone assembly
1x Field-replaceable windscreen with thread-on adapter
3x mounting screws
1x Specification sheet with mounting instructions
1x 3-pin Phoenix type connector