Wireless Component Condenser Vocal Microphone
The ADX10 is a miniaturized condenser microphone designed for lavalier applications such as speech, presentation, and theatrical production. The ADX10 has the ability to accurately capture and reproduce vocals from a comfortable distance of 4″- 8″. This mic is clear, resistant to feedback, and easy to use.
Designed with a uniformly controlled cardioid polar pattern, the ADX10 helps to isolate the area or section being miked from other vocals or instruments on stage. The ADX10 has a smooth, accurate frequency range of 50 Hz – 18 kHz. This mic is lightweight, low profile, and has a natural sound with an exceptional sound response.
Primarily for use with Audix wireless systems, the ADX10 cardioid condenser microphone includes a tie-clip and a 3′ attached cable terminating to a mini-XLRf connector.
|Transducer Type||Pre-polarized Condenser|
|Frequency Response||50Hz – 18kHz|
|Output Impedance||250 Ohms|
|Sensitivity||5 mV/Pa @1k|
|Equivalent Noise Level||<29 dB (A-weighted)|
|Signal to Noise Ratio||>65 dB|
|Maximum SPL||≥120 dB|
|Power Requirements||9-52 V phantom|
|Connector||Shielded 3’ terminating to a miniature 3 pin Female XLR connector|
|Polarity||Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3|
|Materials / Finish||Machined Brass / Black Finish|
|Weight||21 g / 0.74 oz|
|Length||25 mm / .98 in|
1 x ADX10 Vocal Microphone
1 x MC10L tie clip
1 x WS10 external foam windscreen
1 x P1 carrying pouch