Click photo to enlarge
High Res Photos
f6 | Dynamic Instrument, Microphone
Affordable dynamic instrument microphone
The Fusion Series microphones represent affordable excellence.
The f6 dynamic instrument microphone is designed for instruments requiring bass reproduction in live and studio applications. The f6's hypercardioid pick-up pattern helps to minimize feedback and isolate the instrument from ambient sounds on stage.
The f6 instrument microphone has low impedance and balanced output providing interference-free performance.
- Kick Drum
- Kettle drum, floor tom
- Bass Cabinets, Leslie bottom
Please see the spec sheet under the specifications tab for more information about this product.
Type Dynamic Polar Pattern Hypercardioid Frequency Response 40 Hz - 16 kHz Impedance 580 Ohms Sensitivity 1.2 mV / Pa @ 80 Hz
What's In The Box
- 1 x f6 Instrument Microphone
- 1 x DCLIP Microphone Clip
- 1 x P1 Carrying Pouch
"We started our testing of the new Fusion series with the f6 kick mic. As it shares the same clip design as its older sibling, the D6, it was a simple matter to swap in the f6, since I already had a D6 positioned in my bass drum. Before we did that, we recorded a few bars of kick with the D6 as reference, and then replaced it with the f6 and did some more tracking. Upon playback, I first heard the familiar full tone of the D6, and in the few seconds of silence between that and the f6 I thought, Okay, here comes the moment of truth. The f6 ended up producing a very cool kick sound. It was still in the ³pre-equalized, concert-ready² neighborhood of the D6, but it had its own thing going on. The f6 had a bit more midrange punch, and the fundamental resonance was at a slightly higher frequency. It still had the beef on the bottom and plenty of beater attack on top, but it also had a little in-your-face attitude (in a good way). It was universal enough to work in just about any genre, but I think this mic would excel in more aggressive idioms > hard rock, metal, punk, indie, etc."
Mark Parsons, Modern Drummer